mec line

CONTROL OPERATOR SELECTION

Following charts refer to accurate installation, executed with our tools, with only one 90° bend of the conduit; the wind load has not being considered.
Every additional bend or rotary junction box has to be counted as an additional window.
For intermediate window heights refer to the directly lower height; in case of window lower than 750 mm it is necessary to reduce the actuator stroke to 1 /3 of the window height.
For other configurations contact our technical department.

MAXIMUM NUMBER (N) OF WINDOW CONNECTABLE TO A CONTROL OPERATOR ACCORDING TO WINDOW WEIGHT (W) AND HEIGHT (H) AND ACTUATOR STROKE (C)

C = mm 250 W (kg) of the window
10 15 20 25 30 35 40 45 50 60 70
H (mm) 750 8 6 5 4 3 3 2 2 2 1 1
1150 8 8 7 6 5 4 4 3 3 2 2
1250 8 8 8 6 5 4 4 3 3 2 2
1500 8 8 8 7 6 5 5 4 4 3 3
1750 8 8 8 8 7 6 5 5 4 4 3
2000 8 8 8 8 8 7 6 6 5 4 4

C = mm 380 W (kg) of the window
10 15 20 25 30 35 40 45 50 60 70
H (mm) 750
1150 8 6 5 4 3 3 2 2 2 1 1
1250 8 7 5 4 3 3 2 2 2 1 1
1500 8 8 6 5 4 4 3 3 2 2 2
1750 8 8 7 6 5 4 4 3 3 2 2
2000 8 8 8 7 5 5 4 4 3 3 2

CONTROL OPERATOR SELECTION ACCORDING TO WINDOW WEIGHT (W) AND HEIGHT (H), NUMBER (N°) OF WINDOW CONNECTED, AND ACTUATOR STROKE (C)

The above selection guides have to be considered as a general direction and must be checked by the installer.
c = mm 250 W (kg) of the window
H 10 15 20 25 30 35 40 45 50 60 70
750 1                      
2                      
3                      
4                      
5                      
6                      
7                      
1150 1                      
2                      
3                      
4                      
5                      
6                      
7                      
1250 1                      
2                      
3                      
4                      
5                      
6                      
7                      
1500 1                      
2                      
3                      
4                      
5                      
6                      
7                      

 

c = mm 250 W (kg) of the window
H 10 15 20 25 30 35 40 45 50 60 70
1150 1                      
2                      
3                      
4                      
5                      
6                      
7                      
1250 1                      
2                      
3                      
4                      
5                      
6                      
7                      
1500 1                      
2                      
3                      
4                      
5                      
6                      
7                      

 

FLAT OPERATOR SIMPLE, CONCEALED, MINI OPERATOR GEARED OPERATOR